| Dunham Tool
precision r8 collets are available in both inch and metric sizes. R8
collets in round sizes are 1/16" to 7/8" in 1/32" increments, or 3mm to
22mm in 1mm increments. Our r8 collet allows for more rapid tool
changes. R8 collets are typically used as holders for tool shanks, and
are used in Dunham Tool r8 fixtures and r8 precision spindles. R8
collets are also used in many other manufacturers' milling machines,
machining centers, r8 precision spindles and r8 collet fixtures. R8
collets permit more rapid tool changes, and provide an inexpensive and
accurate tool holding method. Our r8 collet is readily available,
typically from stock. |
