Offered in 3 types, our manual collet
chucks are designed to be used as stand alone, in multiples, or for use
on an indexer or rotary table. The ACSU series features
"Dead Length"
holding (with zero part movement) and no "pull back" so
that linear tolerances are maintained.
Operation:
Cam rotates at 90 degree turn, using provided wrench, which lifts collet
sleeve closing collet.
Mounting:
6 mounting holes are positioned for easy
mounting. (5/16" on a 4.12" bolt circle)
Bolt Hole Spacing:
{4}
at 90 degrees (45 degrees off cam) or {3} at 120 degrees
(60 degree off cam.)
