|
COLLET CHUCK TYPES
Standard Pull Back Collet Chucks
These collet chucks actuate the collet by pulling the collet back
into a tapered spindle.
As the collet is pulled back, the tapered spindle causes the collet
to close down to clamp the work part. In this type of collet chuck there is no work part
length control. If the workpart size changes, the linear location of the part will change.
Available most popular collet
configurations in manual and power actuated models.
Push type, Controlled Length
Collet Chucks
These collet chucks maintain an accurate non-changing collet
position. If the work part outside diameter varies, there will be
no linear variation in the work part. A diameter size variation
adaptation feature automatically controls the work part length even
if work part diameter varies. The collet is actuated by moving the
collet or a sleeve forward to actuate the collet. Available in most
standard collet configurations in manual and power actuated models.
Multiple Position Collet Chucks
These collet chucks offer multiple clamping positions in one
fixture. They are available in most standard collet configurations
in pull back or push type actuating features. Available in most
standard collet configurations in manual or power actuated models.
These precision collet chucks may
be mounted directly to American Standard (A4, A5, A6, A8) and
Camlock (D4, D5, D6, D8) style spindles or special fixtures. Collet
chucks are also frequently used on cylindrical grinders, rotary
tables, and many other machines.
Some collet chucks are available for other types of machines where a
stationary non-moving situation is required. There are manually
actuated, air actuated, and hydraulic actuated models. Just browse
the choices below and choose the unit which is best for your
application.
COLLET CHUCK MANUFACTURERS (CLICK ON YOUR CHOICE)
| |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
|
1 |
ATS
|
LOW PROFILE
TRUE LENGTH |
QUICK CHANGE |
PUSH TO PULL |
NOSE
CAP |
PULL TYPE
C STYLE |
PULL TYPE
J STYLE |
PULL TYPE
S STYLE |
ATS PULL TYPE
QUICK CHANGE |
SJOGREN
SPEED CHUCK |
ATS
MANUAL TRUE LENGTH |
|
|
|
2 |
ATLAS |
5C
AIR
5000 RPM |
16C
AIR
5000 RPM |
B42
AIR
5000 RPM |
B60
AIR
3000 ROPM |
B80 AIR
2300 RPM |
5C
STATIONARY
AIR |
JASR Stationary Dead Length |
Air Hydraulic Rotary Power Chuck |
 
5C AND 16C DEAD LENGTH |
5C QUICK CHANGE
|
5C QUICK CHANGE
|
JPCA Collet Chuck with Axial Stop |
JHM-42E Spindle Collet Chuck |
JAM/JHM Spindle Collet Power Chuck |
JAW-42 Spindle Diaphragm Chuck |
JAW-42
Spindle Diaphragm Chuck |
|
|
|
|
|
|
|
|
|
3 |
BEERE |
MULTIDEX 360 |
INLINE
MULTIPLE |
10
UNIFORM |
3J
MULTIPLE |
INDEXABLE
INLINE |
TILT
ROTARY MULTIDEX
360 |
STANDARD
SIDE BY SIDE |
HYDRAULIC
BOOSTER |
|
|
|
|
|
4 |
BISON |
4"
MANUAL 5C |
MANUAL
5C |
5C
SET-TRU |
16C MANUAL |
|
|
|
|
|
|
|
|
|
5 |
BTW
5C FIXTURES |
ONE POSITION |
2 POSITION |
4 POSITION |
HORZ / VERT |
LATHE - MILL |
ROTARY TABLE |
_lg_6.jpg)
VISE - MOUNT |
2 3/16
- 10 MOUNT
SINGLE |
2 3/16 - 10 MOUNT
2 POSITION |
2 3/16 - 10 MOUNT
3 POSITION |
4
POSITION |
|
|
6 |
CRAWFORD |
5C, 16C
DEAD LENGTH SET-RITE |
5C
AND 16C DEAD LENGTH |
5C
AND 16C PULL BACK |
CPC Series Dead-Length |
CDC Standard Length Collet Chuck |
CDC Short Collet Chucks (for
Standard Collets) |
QCD QUICK
CHANGE
A TYPE MOUNT |
QCD
QUICK CHANGE PLAIN BACK |
QCS/QCSD SHORT QUICK CHANGE |
Key Operated KC Series Manual Collet Chucks |
PC SERIES SELF-CONTAINED AIR |
|
|
7 |
DUNHAM
TOOL |
5C,
16C, 3J
PULL TYPE ADJUSTABLE |
5C,
16C, 3J
SELF-CONTAINED |
AIR
COLLET CLOSERS |
|
|
|
|
|
|
|
|
|
|
8 |
EAGLE
ROCK |
MANUAL
5C |
5C
AIR |
3C
AIR |
.gif)
5C
REDMER |
.gif)
5C,
16C,22D
REDMER |
|
|
|
|
|
|
|
|
9 |
HAINBUCH |
SPANNTOP STANDARD |
SPANNTOP
EXPANDING MANREL |
SPANNTOP
JAW CHUCKING |
SPANNTOP QUICK CHANGE |
MANOK
MANUAL
STATIONARY |
MANOK PLUS
MANUAL
STATIONARY |
|
|
|
|
|
|
|
10 |
JFK |
5C COLLET
ADAPTORS |
5C
AIR
MODEL
SCC-C |
5C AIR
CLOSERS
MODEL AM |
5C AIR
MODEL LD |
5C
LEVER ACTION CLOSERS |
|
|
|
|
|
|
|
|
11 |
LEXAIR |
DIRECT MOUNT
5C,15C,3J |
FIXED LENGTH
5C, 16C,3J, B42, B60, B90 |
MANUAL
5C, 16C, 3J
A TYPE
FLATBACK |
5C AIR LOW PRESSURE |
AIR/LOW PRESSURE HYDRALIC
1C, 3C, 5C, 16C,
|
HIGH PRESSURE HYDRAULIC
5C, 16C, 3J, 35J, 22J |
5C
TRI-GRIP
MULTIPLE |
PNEUMATIC/HYDRAULIC STEP COLLET CHUCK |
HYDRAULIC DISCONNECT HANDLES |
AIR OVER HYDRAULIC INTENSIFIER |
|
|
|
12 |
MICRO-
CENTRIC |
NB SERIES QUICK CHANGE PULL BACK |
ND SERIES QUICK CHANGE DEAD LENGTH |
NDR SERIES PUSH TO PULL |
NK SERIES COMBINATION DESIGN |
NB/S SERIES
PULL BACK |
ND/S SERIES
DEAD LENGTH |
NDR/S SERIES PULL TO PUSH |
NS/S SERIES DEAD LENGTH FOR SUB-SPINDLES |
|
|
|
|
|
13 |
RITEN
|
5C
AND 16C SET-LENGTH ADJUSTABLE |
5C AND 16C SET-LENGTH |
5C AND 16C PULL TYPE |
STANDARD
MULTIBORE |
SHORT
MULTIBORE |
QUICK CHANGE MULTIBORE, B42, B60
A MOUNTS |
QUICK CHANGE MULTIBORE, B42, B60
DIN
6353 |
SHORT QUICK CHANGE |
|
|
|
|
|
14 |
ROYAL
|
5C, 16C, 3J
PULL BACK |
PNEUMATIC COLLET CLOSERS |
5C, 16C, 3J, S20, S26, S30 ACCU-LENGTH |
QUICK-GRIP
ACCU-LENGTH COLLET CHUCKS |
QUICK-GRIP
PULL TYPE
COLLET CHUCKS |
|
|
|
|
|
|
|
|
15 |
YUASA |
5C, 16C, 3J MANUAL |
5C MANUAL MULTIPLE |
5C AIR |
ACHT
VALVE |
B42
AIR |
5C AIR ROTATING |
|
|
|
|
|
|
| |
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
|
|
SITE MAP
CLICK HERE FOR PRECISION
COLLETS
CLICK
HERE FOR USED COLLET CHUCKS
ANY PRICES
SHOWN ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTIFICATION OR POSTING.
|
 |
 |
 |
|
CALL TOLL FREE (888-869-2424) TO
PLACE CREDIT CARD ORDERS |
OTHER WORKHOLDING RELATED WEBSITES:
QCS WORKHOLDING LLC
10635 TOWER OAKS BLVD. SUITE E
HOUSTON TX 77070
VOICE 281-664-1020
FAX 281-664-1026
CONTACT US
COPYRIGHT QUICK CHANGE SPECIALTIES
2007
ALL RIGHTS RESERVED
|
